Understanding Wall Anchors and Their Common Problems
Wall anchors are designed to provide support in drywall when installing fixtures. However, they can sometimes fail due to improper installation, insufficient weight capacity, or drywall integrity issues. When wall anchors pull out, they can leave unsightly holes and compromise the ability to securely mount fixtures.
Why Titan Anchors 3/16" Toggle Bolts?
1. Superior Holding Power
Our 3/16" toggle bolts offer impressive holding strength compared to many other types of wall anchors. The toggle's solid steel channel spreads the load across a larger area of the wall, providing better support for fixtures like toilet paper and paper towel holders. This makes them an excellent choice for repairing holes left by failed anchors.
2. Versatility
Our toggle anchors are versatile and suitable for a range of small fixtures. Whether you’re dealing with a paper towel holder or towel rack, 3/16" toggle anchors can accommodate various mounting needs due to the smaller bolt diameter needed to thread the fixtures mounting holes. Their design ensures that they work well in drywall and hollow walls, making them a go-to solution for different types of installations.
3. Easy Installation
Installing 3/16" toggle anchors is straightforward. First, drill a 1/2" hole in the wall where the old anchor was removed, sometimes the hole created from the failed wall anchor is large enough where drilling may not even be necessary. Insert the toggle channel through the hole in the wall, pull back on the ring end of the toggle and zip the flange to the wall until it sits flush with the surface. Bend the straps up and down until each strap snaps off, ensure they snap off flush with the wall. Line up the mounting fixture to the toggle anchor in the wall and thread the toggle's bolt through. Simply hand tighten to secure, do not use power tools.
4. Aesthetic and Functional Repair
Using our e/16" toggle bolts not only provides a sturdy solution but also helps in making the repair process clean and effective. The fixture will be securely mounted, and the toggle bolt’s strength ensures that it won’t loosen over time. This provides peace of mind and preserves the aesthetic of your wall.
Conclusion
Switching to 3/16" toggle bolts is an excellent way to address issues caused by failed wall anchors. Their superior holding power, ease of installation, and versatility make them an ideal choice for mounting small fixtures like toilet paper holders and paper towel holders. By following the simple steps outlined above, you can achieve a sturdy and aesthetically pleasing installation, ensuring your fixtures stay securely in place.
For more home improvement tips and solutions, stay tuned to our blog. If you have any questions or need further assistance, feel free to leave a comment below!