Installation Instructions
-
Step 1.
Using an oscillating tool, rotary tool, or utility knife, carefully cut along the scribe lines on the rail cap to reveal the stake pocket underneath. Discard the cutout plastic square.
-
Step 2.
Remove both screws with a Phillips screwdriver. Angle and maneuver the lower portion of the anchor into the stake pocket. Ensure both sides of the hooks are latched onto the inner rim of the stake pocket.
-
Step 3.
Pull upward on D-ring and insert screws. Hand tighten, give the screws a final 1/4 turn to secure. (Do not over tighten and do not use power tools)
Customer Reviews
I found them very easy to install. I didn't look at many similar anchors before I settled on the Titan. I used a box knife to remove the plastic where they were going to be mounted and I was very pleased with how easy it was. I took my time and made sure that the area I was removing was warm, which made it easier for the knife to cut through with out any problems. After cutting them out I used my Dremel tool with the small sander drum attached to it to smooth out the edges.
This was ordered on a Friday for me. Received Monday and they had easy to install instructions and took about 30 minutes to install. Love them.
