Installation Instructions
-
Step 1.
Using an oscillating tool, rotary tool, or utility knife, carefully cut along the scribe lines on the rail cap to reveal the stake pocket underneath. Discard the cutout plastic square.
-
Step 2.
Remove both screws with a Phillips screwdriver. Angle and maneuver the lower portion of the anchor into the stake pocket. Ensure both sides of the hooks are latched onto the inner rim of the stake pocket.
-
Step 3.
Pull upward on D-ring and insert screws. Hand tighten, give the screws a final 1/4 turn to secure. (Do not over tighten and do not use power tools)
